Servo Mounting Bracket (bracket only)

$5.99

3D Printed SG90 Servo Mounting Bracket for Turnout Control

Clear
SKU: N/A Category:

Description

3D Printed SG90 Servo Mounting Bracket for Turnout Control

NOTE: This product is printed in PLA (Polylactic Acid). PLA is biodegradable and is not meant for use in direct sunlight or very hot conditions.

  • Includes mounting plate for one or two micro switches (micro switches not included)
  • Right Hand (RH) or LH mounting position (orientation)
  • We recommend using standard 2-56 machine screws or #2 sheet metal or wood screws to secure the servo (not included).
  • We recommend using standard 2-56 machine screws, nuts and washers to secure the micro switches (not included).
  • The two holes for mounting the micro switch plate work best if tapped to accept 2-56 machine screws (not included).
  • Pivot holes for the 0.032″ music wire actuator (not included) may need to be opened using a small drill bit.

Additional information

Orientation

Left, Right

Author: Marshall Stull

2 thoughts on “Servo Mounting Bracket (bracket only)

  1. Hi, looks like great products. Is there a way to order them from abroad? I’m in Australia. Thanks, Rene

Leave a Reply to Rene Zwart Cancel reply

Your email address will not be published. Required fields are marked *