{"id":1331,"date":"2015-08-22T15:33:08","date_gmt":"2015-08-22T19:33:08","guid":{"rendered":"http:\/\/smallmr.com\/wordpress\/?p=1331"},"modified":"2015-09-02T18:57:34","modified_gmt":"2015-09-02T22:57:34","slug":"deadrail-system-comparison","status":"publish","type":"post","link":"https:\/\/smallmr.com\/wordpress\/deadrail-system-comparison\/","title":{"rendered":"DeadRail System Comparison"},"content":{"rendered":"

After a (sometimes fierce) debate about available systems for DeadRail on the Yahoo DeadRail Group, I decided to look and compare them for myself. This review only looks at systems that can be used for On30 and smaller scales. There are several Garden Railroading systems that use radio control and batteries but I\u00a0am limiting this review to just systems that pertain to smaller scales.<\/p>\n

Unfortunately, I could not afford to purchase and test each system (as should and needs to be done). The following is a comparison of costs and features as listed on the manufacturer web sites. Some additional information has been gathered from personal observations at trade shows, feedback from the Yahoo DeadRail Group and the manufacturers themselves.<\/p>\n

I have tried to make this a completely unbiased look at the available systems. I welcome feedback and counter views.\u00a0I also welcome any manufacturer that wishes to\u00a0make their products available. I will conduct an unbiased\u00a0review of any product I receive and make it available.<\/p>\n

The following contains a brief description with highlights of each system. At the end of the article is a table showing the list of systems with basic pricing information and technologies used. NOTE: The order of these products is completely random and does not reflect any kind of rating.<\/p>\n

DelTang<\/h1>\n

Most of the DelTang<\/a> products are designed and built by David Theunissen in England.\u00a0David has making receivers since 2009 and is also known for his Radio Controlled model aircraft and products. David provided some personal insight on radio technology for this article. DelTang uses the same technology used in Radio Controlled Model Aircraft to create a system for radio controlled train operation. The end result is a robust system that is low cost and gets the job done.<\/p>\n

\"DelTang
DelTang Throttle TX22B-2<\/figcaption><\/figure>\n

This is the most economical system I found but as such it lacks some advanced features like sound. The only required components are the throttle\/transmitter and the receiver that fits within the locomotive. The low cost of the throttle can be lowered further by purchasing the kit and building it yourself.<\/p>\n

When it comes to battery\u00a0size, volts determine speed, and choosing the number of cells can be a challenge when space is tight. All receivers operate down to 3V (typical single cell lipo) and some up to 18V. The Rx60 illustrated is a common choice. With most of the Rx6x receivers have been deliberately designed to have a wide range of voltages so that people don’t have to commit to a voltage\/speed decision. Batteries are usually inexpensive\u00a0so it’s an easy change if you get it wrong. Fewer cells also allow larger capacity and therefore longer run time between charging. Optimizing these factors helps make DeadRail more practical.<\/p>\n

\"DelTang
DelTang RX60B-2 Receiver<\/figcaption><\/figure>\n

Some setup needs to occur to run multiple locomotives. From the DelTang website:\u00a0The receiver in the loco can only be controlled by a compatible transmitter. Many transmitters can be used simultaneously without frequency control or crystals. For this to work, every receiver needs to be paired with one transmitter in a process called binding. During binding, the transmitter’s unique ID (Guid) is given to the receiver. The receiver then only obeys that transmitter.\u00a0The transmitter can share its Guid with any number of receivers. So one transmitter can control any number of trains. But they all receive the same signals so you normally only have one loco switched on at a time. However, the DelTang Tx22 also has the Selecta ‘loco selector switch’. If used with Rx6x receivers, the receiver also learns the position of the Selecta switch during binding. This allows up to 12 locos (per Tx) to be switched on together and the Selecta switch controls which loco is currently active. The Selecta feature is available on all\u00a0receivers with ’22’ in their name along with\u00a0the Rx41d and Rx45.<\/p>\n

DelTang products use 2.4 Ghz for communication. Older generation radios can have issues with\u00a0simultaneous transmitters and poor interference rejection. These issues can be\u00a0relevant for club meetings and shows but sometimes at occur at home too. 2.4 GHz radios are a big step forward in addressing these issues. Objective assessment of what is best in the products shown here is beyond the scope of this article but these issues have\u00a0been compelling enough for 2.4 to become the standard for plane\/car\/boat hobbyists.<\/p>\n

I have been told that DelTang can be made sound capable with external sound units and a customized throttle. It’s not on by default, and it will require some work, but it can be done.<\/p>\n

The system does not have the capacity for sound and is proprietary but as a low cost and robust system, it gets the job done.<\/p>\n

Tam Valley<\/h1>\n

The Tam Valley<\/a> DRS1 transmitters and receivers are designed to work with existing DCC systems. It allows you to keep your existing\u00a0throttle, base unit and infrastructure and eliminate getting the power from the rails and use batteries instead.<\/p>\n

\"DSR1
DSR1 Transmitter<\/figcaption><\/figure>\n

All that needs to be done is to install a DRS1 to the same wire that goes to your rail then\u00a0install a DRS1 receiver with a battery and DCC decoder of your choice in your locomotive (do not forget to disconnect the rail pickups in the locomotive). Once this is complete you will be able to control your locomotives from your same DCC throttle on battery with all the same functionality that DCC provides plus the exceptional smooth operation batteries provide.<\/p>\n

\"DSR1
DSR1 Receiver<\/figcaption><\/figure>\n

Since the Tam Valley DRS1 works with DCC systems it allows complete flexibility in decoder selection and does not require learning a new system. The drawback to the system is that you must find room for two decoders within the locomotive. This drawback is quickly being overcome as decoder manufacturers are beginning to release new\u00a0DCC decoders with the radio receiver built in such as the NEC\u00a0D13DRJ – Dead Rail Decoder<\/a>.<\/p>\n

According to the Tam Valley Web Site, a DRS1 Receiver can also be controlled with a CVP T5000 handheld transmitter.<\/p>\n

I have personally tested the Tam Valley System using JMRI and a SPROG<\/a>. More information\u00a0can be found in the prior articles\u00a0DEADRAIL FOR FREE-MO<\/a> and\u00a0BATTERY AND WIRELESS CONTROL FOR HO SCALE<\/a>. A low cost DCC system can be setup as shown in this article<\/a>.<\/p>\n

CVP Products<\/h1>\n

CVP<\/a> got their feet wet in large scale radio control products\u00a0and\u00a0have been producing products and Model Railroad Control Systems for\u00a042 years.\u00a0CVP is well know in the Model Railroading Industry having published many articles in Model Railroader Magazine.<\/p>\n

The\u00a0AIRWIRE900 system is a remote control system for garden railroads as well\u00a0as smaller scales like HO, S and O. You control trains with a small handheld controller.<\/p>\n

\"CVP
CVP R5000 Throttle<\/figcaption><\/figure>\n

A system consists of a handheld throttle, and a locomotive mounted motion-decoder powered by a high-capacity\u00a0battery. Each decoder equipped locomotive has a unique address. There are 10,000 possible addresses. Multiple trains can be controlled from a single
\nthrottle.<\/p>\n

The manufacturer promotes\u00a0the throttles as\u00a0simple to learn and easy to use. Locomotives are selected by entering the locomotive\u2019s cab number. Speed control is with a standard and familiar knob. Direction control changed by a\u00a0push down on the speed knob.<\/p>\n

\"CVP
CVP CONVRTR Receiver<\/figcaption><\/figure>\n

The T5000 throttle has a built-In DCC Decoder Programmer. Any NMRA-DCC compatible decoder can be programmed when connected to the\u00a0DCC outputs on the\u00a0G3 motion decoder or the\u00a0CONVRTR.\u00a0The CONVRTR is a small receiver made for smaller scales like\u00a0HO. The CONVRTR is protected against overloads, thermal\u00a0runaway and short circuits. \u00a0When paired with a sound decoder, the CONVRTR provides a unique feature that eliminates stuck\u00a0horns. If the locomotive goes out of range of the throttle while the horn or whistle is blowing, the\u00a0CONVRTR will automatically command the decoder to turn off the horn or whistle. Another version is available for\u00a0brass locomotives called the CONVRTRX. It has a radio module with a\u00a0miniature whip antenna. \u00a0Program all NMRA-DCC CVs from any of the 17 frequencies available\u00a0from the throttle. The\u00a0NEC\u00a0D13DRJ – Dead Rail Decoder<\/a>\u00a0is listed as compatible with CVP products.<\/p>\n

CVP Products has a great wealth of information and data on their website. I recommend a review of all they have to offer.<\/p>\n

Stanton Radio CAB (S-CAB)<\/h1>\n

The Stanton Radio CAB (S-CAB Throttle) <\/a>is a hand-held wireless controller for operating locomotives equipped with an S-CAB radio receiver and DCC decoder. No other DCC equipment is required. An S-CAB throttle sends DCC commands directly to a loco’s S-CAB radio receiver.<\/p>\n

\"S-CAB
S-CAB Throttle<\/figcaption><\/figure>\n

The use of DCC from the receiver allows for great flexibility in the choice of decoder, but requires extra room in the locomotive for both the receiver and the the DCC decoder. The NEC\u00a0D13DRJ – Dead Rail Decoder<\/a> includes a radio receiver that works with S-CAB.\u00a0The S-CAB website offers both NCE and Tsunami sound decoders with integrated\u00a0radio receivers to save space. If you have a particular decoder you need, S-CAB may be able to integrate the receiver for your. Some decoders (like the QSI Titan-U) are already available on a special\u00a0orders basis.<\/p>\n

A Starter Kit is available which includes:\u00a0S-CAB Throttle, a USB cable (for battery charging), and an S-CAB receiver with choice of sound or non-sound decoder. The S-Cab starter set is very affordable and includes everything (even a decoder) to get you started right away.<\/p>\n

\"NCE
NCE D408SR with built-in S-CAB receiver<\/figcaption><\/figure>\n

The\u00a0S-CAB throttle can control up to 15 locomotives with decoder addresses from 1 to 99. It’s designed for one-handed use with slide throttle and direction switch arranged so a user can watch the layout while operating with the controller held, relaxed at arm’s length, by his\/her side. There are no batteries to replace. S-CAB throttle includes a rechargeable battery, which can be recharged from any USB socket.<\/p>\n

S-CAB has done a very good job of providing detailed information and solutions for any foreseen drawbacks. They also\u00a0offer battery solutions on the web site.<\/p>\n

MRC<\/h1>\n

Although not marketed as a DeadRail control system, the\u00a0Freedom One\u00a0Wireless<\/a> control system can be powered by any DC source.\u00a0Freedom One Wireless Sound for DC trains enables you to wirelessly control the throttle, direction, and sounds on a\u00a0locomotive.<\/p>\n

\"MRC
MRC System<\/figcaption><\/figure>\n

The throttle includes an FM remote transmitter and a receiver\/sound decoder with standard NMRA 8 pin plug and JST 9 pin socket.\u00a0If using DC track power, you would set your power pack to top speed and run your locomotives with the supplied remote.<\/p>\n

The receiver measures 50mm x 17.6mm x 7mm. The operating range is approximately 12 feet. You can operate up to three DC sound & control module equipped trains on the same track at the same time.\u00a0The supplied receiver (0001026 HO Diesel) includes 6 prime mover sounds (ALCO 244, 539T, EMD567, 645, 645E, 710),\u00a022 horns and\u00a08 bells. The\u00a0Freedom One is pre-wired to 8 pin plug and comes with an enclosed speaker. Diesel sound is available now with steam in the near future. The receiver will accept a DCC signal from but not while using a DC or battery source.<\/p>\n

Several transmitters are available from MRC.\u00a0Each remote is tied to each receiver on\u00a0a separate frequency. Check the frequency type when purchasing to avoid issues. The receiver is not sold separately.<\/p>\n

Blue Rail Trains<\/h1>\n

Although Blue Rail Trains is not released at this time, the technology is much anticipated. The Bachmann version is designed for DC pickup from the rail. It is obvious that a person can substitute the rail pickup for battery. For that reason, the following\u00a0is a quick update on Blue Rail Trains and some much anticipated images of the products.<\/p>\n

\"iPhone-4S-Bluetooth-Smart\"<\/p>\n

Blue Rail Trains is the first model train control that is based on direct control from any Bluetooth smart device (phone or tablet). Bachmann is currently building this technology into their E-Z App\u2122 trains available in early September. Concurrently Blue Rail is developing Bluetooth Smart plug-in boards that can be added to any 8 or 9 pin DCC-Ready loco (or any other loco, as long as you are willing to snip a few wires).<\/p>\n

The Blue Rail plugin boards contain connection points to hook up a battery and allow for the operation of unlimited locos simultaneously from over 100 feet (the signal strength also also suitable for brass). The firmware in the boards and the software control app are both fully updateable wirelessly, and the boards contain an expansion port intended for an eventual sound module (or other future add-ons). The battery connection points will not currently recharge batteries from track current (but that could potentially be supported).\u00a0Blue Rail has a background in game development, and intend the system as a platform to develop apps that offer game-play, operating session simulation, and virtual layout interactivity.<\/p>\n

\"BlueRail_ScreenGrabs\"
Blue Rail Throttle Screen Shots<\/figcaption><\/figure>\n

 <\/p>\n

The first plug-in boards are scheduled to be released in September (concurrent with the Bachmann release) and will eventually be available in most scales. Pricing and board dimensions will be available soon (on the BlueRail website and facebook page), but the intent is to make the board pricing competitive with existing solutions. To use these boards you will need to own a Bluetooth Smart phone, ipod or tablet from the list on this page: http:\/\/www.bluetooth.com\/Pages\/Bluetooth-Smart-Devices-List.aspx.<\/a><\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

DeadRail Control System Comparison<\/h2>\n<\/td>\n<\/tr>\n

Company<\/strong><\/td>\nProduct Name<\/strong><\/td>\nRadio Frequency<\/strong><\/td>\nDCC Compatible<\/strong><\/td>\nSound\u00b9<\/strong><\/td>\nReceiver Cost<\/strong><\/td>\nThrottle Cost<\/strong><\/td>\nEst. Startup Cost\u00b2<\/strong><\/td>\n<\/tr>\n
DelTang<\/a><\/td>\nDelTang<\/a><\/td>\n2.4 Ghz<\/td>\nNo<\/td>\nYes?<\/td>\n$47.00<\/td>\n$70.00<\/td>\n$117.00<\/td>\n<\/tr>\n
Tam Valley<\/a><\/td>\nDRS1<\/a><\/td>\n916.49 MHz
\n869 MHz (EU)<\/td>\n		Yes<\/td>\nYes<\/td>\n$59.95\u00b3<\/td>\n$69.95\u00b3<\/td>\n$139.90<\/td>\n<\/tr>\n
CVP\u00a0Products<\/a><\/td>\nAIRWIRE900<\/a><\/td>\n902 MHz to 928 MHz<\/td>\nYes<\/td>\nYes<\/td>\n$99.00<\/td>\n$159.00<\/td>\n$258.00<\/td>\n<\/tr>\n
S-CAB<\/a><\/td>\nStanton Radio Cab<\/a><\/td>\n916.49 MHz<\/td>\nYes<\/td>\nYes<\/td>\n$59.00<\/td>\n$139.00<\/td>\n$189.00<\/td>\n<\/tr>\n
MRC<\/a><\/td>\nFREEDOM ONE<\/a><\/td>\nUnknown<\/td>\nYes<\/td>\nNo<\/td>\nIncluded<\/td>\n$109.98<\/td>\n$109.98<\/td>\n<\/tr>\n
Blue Rail Trains<\/a><\/td>\nBlue Rail Trains<\/a><\/td>\nBluetoothLE (2.4 Ghz)<\/td>\nNo<\/td>\nYes<\/td>\nTBD<\/td>\nTBD<\/td>\nTBD<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00b9 Indicates sound capable, may require additional expense or 3rd party components<\/p>\n

\u00b2 Cost of base equipment to get at least one train running. Does not include battery, DCC components, chargers or other accessories. If a starter set was available that cost was used.<\/p>\n

\u00b3 Requires DCC System\u00a0(not included)<\/p>\n","protected":false},"excerpt":{"rendered":"

After a (sometimes fierce) debate about available systems for DeadRail on the Yahoo DeadRail Group, I decided to look and compare them for myself. This…<\/p>\n","protected":false},"author":2,"featured_media":1373,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[32],"tags":[35],"class_list":["post-1331","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-train-control","tag-august-2015","wpcat-32-id"],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/smallmr.com\/wordpress\/wp-content\/uploads\/2015\/08\/BlueRail_ScreenGrabs.jpg","jetpack_shortlink":"https:\/\/wp.me\/p4e6yk-lt","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":885,"url":"https:\/\/smallmr.com\/wordpress\/deadrail-for-free-mo\/","url_meta":{"origin":1331,"position":0},"title":"Deadrail for Free-mo","author":"Marshall Stull","date":"July 12, 2014","format":false,"excerpt":"Did a quick video of the new setup of an HO scale Deadrail System.\u00a0Deadrail is when there is no power to the rails and the trains run on batteries. First tests look VERY promising. I plan on trying a series of tests on the Free-mo setup at the National Train\u2026","rel":"","context":"In "Train Control"","block_context":{"text":"Train Control","link":"https:\/\/smallmr.com\/wordpress\/category\/train-control\/"},"img":{"alt_text":"Battery locomotive components from left to right: Battery, Low Battery Alarm, DRS1 reciever","src":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2970.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2970.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2970.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2970.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2970.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":895,"url":"https:\/\/smallmr.com\/wordpress\/low-costlow-effort-dcc-for-the-small-layout\/","url_meta":{"origin":1331,"position":1},"title":"Low Cost\/Low Effort DCC for the Small Layout","author":"Marshall Stull","date":"August 30, 2014","format":false,"excerpt":"If there is a chance that I am going to run more than one locomotive at a time on a layout, I will use Digital Command Control (DCC). I have heard many people complain that DCC is difficult, to expensive and\u00a0takes to much\u00a0time to learn\/setup. Granted DC is simple to\u2026","rel":"","context":"In "Train Control"","block_context":{"text":"Train Control","link":"https:\/\/smallmr.com\/wordpress\/category\/train-control\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/08\/JMRI-Feature.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":944,"url":"https:\/\/smallmr.com\/wordpress\/battery-and-wireless-control-for-ho-scale\/","url_meta":{"origin":1331,"position":2},"title":"Battery and Wireless Control for HO Scale","author":"Marshall Stull","date":"September 22, 2014","format":false,"excerpt":"In the prior article,\u00a0Deadrail for Free-mo, I\u00a0gave a short preview of a battery locomotive\u00a0setup that I would test at the upcoming Free-mo event at the National Train Show (NTS) in Cleveland OH. In this article we will examine the components and methods used to build and control the locomotives in\u2026","rel":"","context":"In "Train Control"","block_context":{"text":"Train Control","link":"https:\/\/smallmr.com\/wordpress\/category\/train-control\/"},"img":{"alt_text":"The payoff! Running smoother than silk with batteries and wireless control.","src":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2744.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2744.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2744.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2744.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2014\/09\/IMG_2744.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":1109,"url":"https:\/\/smallmr.com\/wordpress\/model-railroad-control-systems-the-next-generation\/","url_meta":{"origin":1331,"position":3},"title":"Model Railroad Control Systems \u2013 The Next Generation","author":"Marshall Stull","date":"February 27, 2015","format":false,"excerpt":"Recent technology growth combined with innovative modelers has created a whole new trend in Model Railroad Control Systems with electric power. Prior to 1990, most control systems were DC with block control in the smaller scales or AC in some larger scales. There were some radio controlled systems, but there\u2026","rel":"","context":"In "Train Control"","block_context":{"text":"Train Control","link":"https:\/\/smallmr.com\/wordpress\/category\/train-control\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2015\/02\/iPhone-4S-Bluetooth-Smart.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2015\/02\/iPhone-4S-Bluetooth-Smart.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2015\/02\/iPhone-4S-Bluetooth-Smart.png?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":108,"url":"https:\/\/smallmr.com\/wordpress\/consider-the-small-layout\/","url_meta":{"origin":1331,"position":4},"title":"Consider the Small Layout","author":"Marshall Stull","date":"October 14, 2012","format":false,"excerpt":"NOTE: Many of the sample layouts featured in this article were borrowed from\u00a0Carl Arendt's web site. Links back to appropriate page on Carl's site have been provided. Among North American Model Railroad Hobbyists, there is a\u00a0predominant\u00a0thought that a \"real\" layout is one that fills a large space such as a\u2026","rel":"","context":"In "Small Layout How To Articles"","block_context":{"text":"Small Layout How To Articles","link":"https:\/\/smallmr.com\/wordpress\/category\/articles-on-small-layouts\/"},"img":{"alt_text":"Carl Arendt's Squarefoot Estate Railway, G scale in one square foot","src":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2012\/10\/sqrfoot1.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":5514,"url":"https:\/\/smallmr.com\/wordpress\/small-layout-meet-2023-2\/","url_meta":{"origin":1331,"position":5},"title":"Small Layout Meet 2023","author":"Marshall Stull","date":"August 22, 2023","format":false,"excerpt":"Back in June I managed to take time to travel to Findlay and the 2023 Small Layout Meet. While there I tried to video document as many layouts as I could. There was a very good mix of sizes, scales, gauges and all levels of completeness. I hope you enjoy\u2026","rel":"","context":"In "Layout Spotlight"","block_context":{"text":"Layout Spotlight","link":"https:\/\/smallmr.com\/wordpress\/category\/layout-spotlight\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2023\/08\/CoverImage.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2023\/08\/CoverImage.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2023\/08\/CoverImage.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2023\/08\/CoverImage.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2023\/08\/CoverImage.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/smallmr.com\/wordpress\/wp-content\/uploads\/2023\/08\/CoverImage.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/posts\/1331","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/comments?post=1331"}],"version-history":[{"count":34,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/posts\/1331\/revisions"}],"predecessor-version":[{"id":1405,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/posts\/1331\/revisions\/1405"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/media\/1373"}],"wp:attachment":[{"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/media?parent=1331"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/categories?post=1331"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/smallmr.com\/wordpress\/wp-json\/wp\/v2\/tags?post=1331"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}